View TSV630_4555910.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TSV630 - TSV631
Rail-to-rail input/output 60 A 880 kHz CMOS operational amplifier
Features

Low offset voltage: 500 V max (A version) Low power consumption: 60 A typ at 5 V Low supply voltage: 1.5 V - 5.5 V Gain bandwidth product: 880 kHz typ Unity gain stability Low power shutdown mode: 5 nA typ High output current: 63 mA at VCC = 5 V Low input bias current: 1 pA typ Rail-to-rail input and output Extended temperature range: -40C to +125C
In+ 1 VDD 2 In- 3
6 VCC
+ _
5 SHDN 4 Out
TSV630ICT/ILT SC70-6/SOT23-6
In+ 1 VDD 2 In- 3 5 VCC
+ _
4 Out
TSV631ICT/ILT SC70-5/SOT23-5
Applications

Battery-powered applications Portable devices Signal conditioning Active filtering Medical instrumentation
The devices are internally adjusted to provide very narrow dispersion of AC and DC parameters, especially power consumption, product gain bandwidth and slew rate. The TSV630 provides a shutdown function. Both the TSV630 and TSV631 have a high tolerance to ESD, sustaining 4 kV for the human body model. Additionally, they are offered in micropackages, SC70-6 and SOT23-6 for the TSV630 and SC70-5 and SOT23-5 for the TSV631. They are guaranteed for industrial temperature ranges from -40 C to +125 C. All these features combined make the TSV630 and TSV631 ideal for sensor interfaces, battery-supplied and portable applications, as well as active filtering.
Description
The TSV630 and TSV631 devices are single operational amplifiers offering low voltage, low power operation and rail-to-rail input and output. With a very low input bias current and low offset voltage (500 V maximum for the A version), the TSV630 and TSV631 are ideal for applications that require precision. The devices can operate at power supplies ranging from 1.5 to 5.5 V, and are therefore ideal for battery-powered devices, extending battery life. These products feature an excellent speed/power consumption ratio, offering a 880 kHz gain bandwidth while consuming only 60 A at a 5-V supply voltage. These op-amps are unity gain stable for capacitive loads up to 100 pF.
December 2008
Rev 1
1/23
www.st.com 23
Absolute maximum ratings and operating conditions
TSV630 - TSV631
1
Absolute maximum ratings and operating conditions
Table 1.
Symbol
Absolute maximum ratings (AMR)
Parameter Value Unit
(1) (2)
VCC Vid Vin Iin SHDN Tstg
Supply voltage
6 VCC VDD-0.2 to VCC+0.2 10
(3)
V V V mA V C
Differential input voltage Input voltage Input current
(3) (4)
Shutdown voltage
6 -65 to +150 205 250 240 232 150 4 300
(9)
Storage temperature Thermal resistance junction to ambient(5)(6) SC70-5 SOT23-5 SOT23-6 SC70-6 Maximum junction temperature HBM: human body model(7)
(8)
Rthja
C/W
Tj ESD
C kV V kV mA
MM: machine model
CDM: charged device model Latch-up immunity
1.5 200
1. All voltage values, except differential voltages, are with respect to network ground terminal. 2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. 3. VCC-Vin must not exceed 6 V. 4. Input current must be limited by a resistor in series with the inputs. 5. Short-circuits can cause excessive heating and destructive dissipation. 6. Rth are typical values. 7. Human body model: 100 pF discharged through a 1.5 k resistor between two pins of the device, done for all couples of pin combinations with other pins floating. 8. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5 ), done for all couples of pin combinations with other pins floating. 9. Charged device model: all pins plus package are charged together to the specified voltage and then discharged directly to the ground.
Table 2.
Symbol
Operating conditions
Parameter Value Unit
VCC Vicm Toper
Supply voltage Common mode input voltage range Operating free air temperature range
1.5 to 5.5 VDD -0.1 to VCC +0.1 -40 to +125
V V C
2/23
TSV630 - TSV631
Electrical characteristics
2
Table 3.
Symbol
Electrical characteristics
Electrical characteristics at VCC = +1.8 V with VDD = 0 V, Vicm = VCC/2, Tamb = 25 C and RL connected to VCC/2 (unless otherwise specified)
Parameter Conditions Min. Typ. Max. Unit
DC performance
TSV630-TSV631 TSV630A-TSV631A Vio Offset voltage Tmin < Top < Tmax TSV630-TSV631 TSV630A-TSV631A 2 1 Tmin < Top < Tmax 1 1 Tmin < Top < Tmax 0 V to 1.8 V, Vout = 0.9 V Tmin < Top < Tmax RL= 10 k Vout = 0.5 V to 1.3 V , Tmin < Top < Tmax High level output voltage RL = 10 k Tmin < Top < Tmax Low level output voltage RL = 10 k Tmin < Top < Tmax Isink Iout Isource Supply current SHDN = VCC Vo = 1.8 V Tmin < Top < Tmax Vo = 0 V Tmin < Top < Tmax No load, Vout =VCC/2 Tmin < Top < Tmax 6 4 6 4 40 50 10 12 53 51 85 80 35 50 4 5 95 1 74
3 0.5 4.5 2
mV
DVio Iio
Input offset voltage drift Input offset current (Vout = VCC/2) Input bias current (Vout = VCC/2) Common mode rejection ratio 20 log (Vic/Vio) Large signal voltage gain
V/C
10(1) pA 100 10(1) pA 100 dB
Iib
CMR
Avd
dB
VOH
mV 35 mV 50 mA
VOL
mA 60 62
ICC
A
AC performance
GBP
m
Gain bandwidth product Phase margin Gain margin Slew rate Equivalent input noise voltage
RL = 2 k CL=100 pF, f= 100 kHz , RL = 2 k, CL = 100 pF RL = 2 k, CL = 100 pF RL = 2 k, CL = 100 pF, Av = 1 f = 1 kHz f = 10 kHz
700
790 48 11
kHz Degrees dB V/s
nV ----------Hz
Gm SR en
0.2
0.27 65 35
1. Guaranteed by design.
3/23
Electrical characteristics Table 4.
Symbol DC performance
TSV630 - TSV631
Shutdown characteristics VCC = 1.8 V
Parameter Conditions Min. Typ. Max. Unit
ICC
Supply current in shutdown mode (all operators) Amplifier turn-on time Amplifier turn-off time SHDN logic high SHDN logic low SHDN current high SHDN current low Output leakage in shutdown mode
SHDN < VIL Tmin < Top < 85 C Tmin < Top < 125 C RL = 2 k, Vout = VDD + 0.2 to VCC - 0.2 RL = 2 k, Vout = VDD + 0.2 to VCC - 0.2 1.3
2.5
50 200 1.5
nA nA A ns ns V
ton toff VIH VIL IIH IIL IOLeak
300 20
0.5 SHDN = VCC SHDN = VDD SHDN = VDD Tmin < Top < 125 C 10 10 50 1
V pA pA pA nA
4/23
TSV630 - TSV631 Table 5.
Symbol DC performance
Electrical characteristics
VCC = +3.3 V, VDD = 0 V, Vicm = VCC/2, Tamb = 25 C, RL connected to VCC/2 (unless otherwise specified)
Parameter Conditions Min. Typ. Max. Unit
TSV630-TSV631 TSV630A-TSV631A Vio Offset voltage Tmin < Top < Tmax TSV630-TSV631 TSV630A-TSV631A 2 1 Iio Input offset current Tmin < Top < Tmax Input bias current Tmin < Top < Tmax Common mode rejection ratio 20 log (Vic/Vio) Large signal voltage gain 0 V to 3.3 V, Vout = 1.75 V Tmin < Top < Tmax RL = 10 k Vout = 0.5 V to 2.8 V , Tmin < Top < Tmax High level output voltage RL = 10 k Tmin. < Top < Tmax Low level output voltage RL = 10 k Tmin < Top < Tmax Isink Iout Isource Supply current SHDN = VCC Vo = 3.3 V Tmin < Top < Tmax Vo = 0 V Tmin < Top < Tmax No load, Vout = 1.75 V Tmin < Top < Tmax 30 25 30 25 43 55 45 57 53 88 83 35 50 7 6 98 1 79 1 1 Iib
3 0.5 4.5 2
mV
DVio
Input offset voltage drift
V/C
10(1) pA 100 10(1) pA 100 dB
CMR
Avd
dB
VOH
mV 35 mV 50 mA 42 38 mA 64 66
A A
VOL
ICC
AC performance
GBP
m
Gain bandwidth product Phase margin Gain margin Slew rate Equivalent input noise voltage
RL = 2 k CL = 100 pF, f = 100 kHz , RL = 2 k, CL = 100 pF RL = 2 k, CL= 100 pF , RL = 2 k CL = 100 pF, Av = 1 f = 1 kHz
710
860 50 11
kHz Degrees dB V/s
nV ----------Hz
Gm SR en
0.22
0.29 65
1. Guaranteed by design.
5/23
Electrical characteristics Table 6.
Symbol DC performance
TSV630 - TSV631
Electrical characteristics at VCC = +5 V with VDD = 0 V, Vicm = VCC/2, Tamb = 25 C and RL connected to VCC/2 (unless otherwise specified)
Parameter Conditions Min. Typ. Max. Unit
TSV630-TSV631 TSV630A-TSV631A Vio Offset voltage Tmin < Top < Tmax TSV630-TSV631 TSV630A-TSV631A 2 1 Tmin < Top < Tmax 1 1 Tmin < Top < Tmax 0 V to 5 V, Vout = 2.5 V Tmin < Top < Tmax VCC = 1.8 to 5 V Tmin < Top < Tmax , RL= 10 k Vout= 0.5 V to 4.5 V Tmin < Top < Tmax High level output voltage RL = 10 k Tmin < Top < Tmax Low level output voltage RL = 10 k Tmin < Top < Tmax Isink Iout Isource Supply current SHDN = VCC Vo = 5 V Tmin < Top < Tmax Vo = 0 V Tmin < Top < Tmax No load, Vout=VCC/2 Tmin < Top < Tmax 40 35 40 36 50 69 89 84 35 50 6 7 98 60 55 75 102 1 80
3 0.5 4.5 2
mV
mV
V/C
DVio Iio
Input offset voltage drift Input offset current (Vout = VCC/2) Input bias current (Vout = VCC/2) Common mode rejection ratio 20 log (Vic/Vio) Supply voltage rejection ratio 20 log (VCC/Vio) Large signal voltage gain
10(1) pA 100 10(1) pA 100 dB
Iib
CMR
SVR
dB
Avd
dB
VOH
mV 35 mV 50 mA 65 74 68 60 69 72
A
VOL
mA
ICC
AC performance
GBP Fu
m
Gain bandwidth product Unity gain frequency Phase margin Gain margin Slew rate
, RL = 2 k CL= 100 pF, f = 100 kHz RL = 2 k CL = 100 pF, , RL = 2 k, CL = 100 pF RL = 2 k, CL = 100 pF RL = 2 k, CL = 100 pF, Av = 1
730
880 830 50 12
kHz kHz Degrees dB V/s
Gm SR
0.25
0.34
6/23
TSV630 - TSV631 Table 6.
Symbol
Electrical characteristics
Electrical characteristics at VCC = +5 V with VDD = 0 V, Vicm = VCC/2, Tamb = 25 C and RL connected to VCC/2 (unless otherwise specified) (continued)
Parameter Conditions Min. Typ. Max. Unit
nV ----------Hz
en THD+en
Equivalent input noise voltage Total harmonic distortion
f = 1 kHz f = 10 kHz f = 1 kHz, AV = 1, RL = 100 k, Vicm = VCC/2, Vout = 2 VPP
65 35 0.0017
%
1. Guaranteed by design.
Table 7.
Symbol
Shutdown characteristics VCC = 5 V
Parameter Conditions Min. Typ. Max. Unit
DC performance
SHDN5
50 200 1.5
nA nA A ns ns V
300 30
0.5 10 10 50 1
V pA pA pA nA
7/23
Electrical characteristics
TSV630 - TSV631
Figure 1.
Supply current vs. supply voltage at Vicm = VCC/2
Figure 2.
Output current vs. output voltage at VCC = 1.5 V
Figure 3.
Output current vs. output voltage at Figure 4. VCC = 5 V
Voltage gain and phase vs. frequency at VCC = 1.5 V
Gain (dB)
Figure 5.
Voltage gain and phase vs. frequency at VCC = 5 V
Figure 6.
Phase margin vs. output current at VCC = 5 V
90 80 70 60 Cl=100pF
Gain (dB)
Phase ()
50 40 30 20 10 0 -1.5 Vcc=5V, Vicm=2.5V Rl=2kohms, T=25 C -1.0 -0.5 0.0 0.5 1.0 1.5 Cl=330pF
8/23
Phase ()
TSV630 - TSV631
Electrical characteristics
Figure 7.
Positive slew rate vs. time
Figure 8.
Negative slew rate vs. time
Output voltage (V)
Time (s)
Time (s)
Figure 9.
0.5
Positive slew rate vs. supply voltage
Figure 10. Negative slew rate vs. supply voltage
0.0
0.4
-0.1
0.3
-0.2
0.2
-0.3
0.1
-0.4
0.0 2.5
3.0
3.5 4.0 4.5 Supply Voltage (V)
5.0
5.5
-0.5 2.5
3.0
3.5 4.0 4.5 Supply Voltage (V)
5.0
5.5
Figure 11. Distortion + noise vs. output voltage (RL = 2 k)
f=1kHz, Av=1 Rl=2kOhms to Vcc/2 Vicm=(Vcc-0.7)/2 BW=22kHz Vcc=1.8V
Figure 12. Distortion + noise vs. output voltage (RL = 100 k)
f=1kHz, Av=1 Rl=100kOhms to Vcc/2 Vicm=(Vcc-0.7)/2 BW=22kHz
Vcc=3.3V
THD + N (%)
Vcc=1.5V
THD + N (%)
Vcc=1.5V Vcc=5V Vcc=5.5V
Output Voltage (Vpp)
Output Voltage (Vpp)
9/23
Electrical characteristics
TSV630 - TSV631
Figure 13. Distortion + noise vs. frequency
Figure 14. Distortion + noise vs. frequency
THD + N (%)
0.1
THD + N (%)
0.1
Vcc=5.5V Rl=100k
0.01 Vin=3Vpp 0.01
Vcc=5.5V Rl=2k
1E-3 10
100
1000
10000
10
100
1000
10000
Figure 15. Noise vs. frequency
Equivalent Input Voltage Noise (nV/VHz)
300 250 Vicm=2.5V 200 150 100 50
Vicm=4.5V Vcc=5V Tamb=25 C 100 1000 10000
10
10/23
TSV630 - TSV631
Application information
3
3.1
Application information
Operating voltages
The TSV630 and TSV631 can operate from 1.5 to 5.5 V. Their parameters are fully specified for 1.8-, 3.3- and 5-V power supplies. However, the parameters are very stable in the full VCC range and several characterization curves show the TSV63x characteristics at 1.5 V. Additionally, the main specifications are guaranteed in extended temperature ranges from -40 C to +125 C.
3.2
Rail-to-rail input
The TSV630 and TSV631 are built with two complementary PMOS and NMOS input differential pairs. The devices have a rail-to-rail input, and the input common mode range is extended from VDD -0.1 V to VCC +0.1 V. The transition between the two pairs appears at VCC -0.7 V. In the transition region, the performance of CMRR, PSRR, Vio and THD is slightly degraded (as shown in Figure 16 and Figure 17 for Vio vs. Vicm).
Figure 16. Input offset voltage vs input common mode at VCC = 1.5 V
0.5 0.4
Input Offset Voltage (mV)
Figure 17. Input offset voltage vs input common mode at VCC = 5 V
0.4
Input Offset Voltage (mV)
0.3 0.2 0.1 0.0 -0.1 -0.2 -0.3 -0.4 -0.5 -0.2 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 Input Common Mode Voltage (V) 1.6
0.2
0.0
-0.2
-0.4 0.0 1.0 2.0 3.0 4.0 Input Common Mode Voltage (V) 5.0
The device is guaranteed without phase reversal.
3.3
Rail-to-rail output
The operational amplifiers' output levels can go close to the rails: 35 mV maximum above and below the rail when connected to a 10 k resistive load to VCC/2.
11/23
Application information
TSV630 - TSV631
3.4
Shutdown function (TSV630)
The operational amplifier is enabled when the SHDN pin is pulled high. To disable the amplifier, the SHDN must be pulled down to VDD. When in shutdown mode, the amplifier output is in a high impedance state. The SHDN pin must never be left floating, but tied to VCC or VDD. The turn-on and turn-off time are calculated for an output variation of 200 mV (Figure 18 and Figure 19 show the test configurations).
Figure 18. Test configuration for turn-on time (Vout pulled down)
Figure 19. Test configuration for turn-off time (Vout pulled down)
+Vcc
GND
2KO
+Vcc
GND
2KO
Vcc = 5V T = 25C Vout
Vcc-0.5V
+ DUT GND
Vcc-0.5V
+ DUT GND
Figure 20. Turn-on time, VCC = 5 V, Vout pulled down, T = 25 C
Shutdown pulse
Figure 21. Turn-off time, VCC = 5 V, Vout pulled down, T = 25 C
Shutdown pulse
Output voltage (V)
Voltage (V)
Vout
Vcc = 5V T = 25C
Time( s)
Time( s)
12/23
TSV630 - TSV631
Application information
3.5
Optimization of DC and AC parameters
These devices use an innovative approach to reduce the spread of the main DC and AC parameters. An internal adjustment achieves a very narrow spread of the current consumption (60 A typical, min/max at 17 %). Parameters linked to the current consumption value, such as GBP, SR and AVd, benefit from this narrow dispersion. All parts present a similar speed and the same behavior in terms of stability. In addition, the minimum values of GBP and SR are guaranteed (GBP = 730 kHz minimum and SR = 0.25 V/s minimum).
3.6
Driving resistive and capacitive loads
These products are micro-power, low-voltage operational amplifiers optimized to drive rather large resistive loads, above 2 k For lower resistive loads, the THD level may significantly . increase. In a follower configuration, these operational amplifiers can drive capacitive loads up to 100 pF with no oscillations. When driving larger capacitive loads, adding an in-series resistor at the output can improve the stability of the devices (see Figure 22 for recommended in-series resistor values). Once the in-series resistor value has been selected, the stability of the circuit should be tested on bench and simulated with the simulation model. Figure 22. In-series resistor vs. capacitive load
3.7
PCB layouts
For correct operation, it is advised to add 10 nF decoupling capacitors as close as possible to the power supply pins.
In-series resistor ()
13/23
Application information
TSV630 - TSV631
3.8
Macromodel
An accurate macromodel of the TSV630 and TSV631 is available on STMicroelectronics' web site at www.st.com. This model is a trade-off between accuracy and complexity (that is, time simulation) of the TSV63x operational amplifiers. It emulates the nominal performances of a typical device within the specified operating conditions mentioned in the datasheet. It also helps to validate a design approach and to select the right operational amplifier, but it does not replace on-board measurements.
14/23
TSV630 - TSV631
Package information
4
Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark.
15/23
Package information
TSV630 - TSV631
4.1
SOT23-5 package mechanical data
Figure 23. SOT23-5L package mechanical drawing
Table 8.
SOT23-5L package mechanical data
Dimensions
Ref. Min.
Millimeters Typ. Max. Min.
Inches Typ. Max.
A A1 A2 B C D D1 e E F L K
0.90
1.20
1.45 0.15
0.035
0.047
0.057 0.006
0.90 0.35 0.09 2.80
1.05 0.40 0.15 2.90 1.90 0.95
1.30 0.50 0.20 3.00
0.035 0.013 0.003 0.110
0.041 0.015 0.006 0.114 0.075 0.037
0.051 0.019 0.008 0.118
2.60 1.50 0.10 0 degrees
2.80 1.60 0.35
3.00 1.75 0.60 10 degrees
0.102 0.059 0.004
0.110 0.063 0.013
0.118 0.069 0.023
16/23
TSV630 - TSV631
Package information
4.2
SOT23-6 package mechanical data
Figure 24. SOT23-6L package mechanical drawing
Table 9.
SOT23-6L package mechanical data
Dimensions
Ref. Min.
Millimeters Typ. Max. Min.
Inches Typ. Max.
A A1 A2 b c D E e H L
0.90
1.45 0.10
0.035
0.057 0.004
0.90 0.35 0.09 2.80 1.50 0.95 2.60 0.10 0
1.30 0.50 0.20 3.05 1.75
0.035 0.013 0.003 0.110 0.060 0.037
0.051 0.019 0.008 0.120 0.069
3.00 0.60 10
0.102 0.004
0.118 0.024
17/23
Package information
TSV630 - TSV631
4.3
SC70-6 (or SOT323-6) package mechanical data
Figure 25. SC70-6 (or SOT323-6) package mechanical drawing
Table 10.
SC70-6 (or SOT323-6) package mechanical data
Dimensions
Ref Min.
Millimeters Typ. Max. Min.
Inches Typ. Max.
A A1 A2 b c D E e HE L Q1
0.80
1.10 0.10
0.031
0.043 0.004
0.80 0.15 0.10 1.80 1.15 0.65 1.80 0.10 0.10
1.00 0.30 0.18 2.20 1.35
0.031 0.006 0.004 0.071 0.045 0.026
0.039 0.012 0.007 0.086 0.053
2.40 0.40 0.40
0.071 0.004 0.004
0.094 0.016 0.016
18/23
TSV630 - TSV631 Figure 26. SC70-6 (or SOT323-6) package footprint
Package information
19/23
Package information
TSV630 - TSV631
4.4
SC70-5 (or SOT323-5) package mechanical data
Figure 27. SC70-5 (or SOT323-5) package mechanical drawing
SIDE VIEW DIMENSIONS IN MM
GAUGE PLANE
COPLANAR LEADS
SEATING PLANE
TOP VIEW
Table 11.
SC70-5 (or SOT323-5) package mechanical data
Dimensions
Ref Min
Millimeters Typ Max Min
Inches Typ Max
A A1 A2 b c D E E1 e e1 L <
0.80
1.10 0.10
0.315
0.043 0.004
0.80 0.15 0.10 1.80 1.80 1.15
0.90
1.00 0.30 0.22
0.315 0.006 0.004 0.071 0.071 0.045
0.035
0.039 0.012 0.009
2.00 2.10 1.25 0.65 1.30
2.20 2.40 1.35
0.079 0.083 0.049 0.025 0.051
0.087 0.094 0.053
0.26 0
0.36
0.46 8
0.010
0.014
0.018
20/23
TSV630 - TSV631
Ordering information
5
Ordering information
Table 12. Order codes
Temperature range Package Packing Marking
Part number
TSV630ILT TSV630ICT TSV631ILT TSV631ICT TSV630AILT TSV630AICT TSV631AILT TSV631AICT
-40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C
SOT23-6 SC70-6 SOT23-5 SC70-5 SOT23-6 SC70-6 SOT23-5 SC70-5
Tape & reel Tape & reel Tape & reel Tape & reel Tape & reel Tape & reel Tape & reel Tape & reel
K108 K18 K109 K19 K141 K41 K142 K42
21/23
Revision history
TSV630 - TSV631
6
Revision history
Table 13.
Date
Document revision history
Revision Changes
19-Dec-2008
1
Initial release.
22/23
TSV630 - TSV631
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
23/23

▲Up To Search▲

Price & Availability of TSV630

	To Download TSV630 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .